The Motor Home will be set up to cater for both Stored & External town water supplies when available, The water heating will accomplished using Diesel burning Heater & 240v Element when Mains power is available. The Hot water storage system will be a modified 315L unit I have available.
My water storage requirements are 400L drinking, 400L washing/general use & at lest 250L Grey water, the system will consist of 2 pumps one each for the Potable & non-potable supplies. The potable system has a filtered water supply to 2 separate taps 1 in the Vanity unit & 1 on the Kitchen sink, the Flick mixer at the sink also has a selector tap for Potable or Non-potable supply when required.
The water storage will be Bladder tanks for the Grey & Non-potable & a Poly tank for the potable water.
We have decided to installed a small Fysher/Pykel Dish Draw washer into the Microwave Cabinet.
The toilet is a Dometic rear access cassette unit with the porcelain insert, it will be installed in a separate room to the Shower & will be accessed from the walkway between the Shower & the Bedroom. I will endeavor to include a small hand basin into the access to the toilet.
The Shower unit is to be a 900 x 900 unit & will have the base lowered into the floor 75mm to give more head room when being used, it will only only be assessable from the Bedroom & will incorporate a small wet area for drying & changing, this area is to include Storage for Linen & Towels.
You actually make it seem so easy with your presentation but I
find this matter to be really something that I think I would never understand.
It seems too complex and very broad for me. I am looking forward for your next post, I will try to get
the hang of it!
Aw, this was an exceptionally nice post. Taking the time and actual
effort to produce a great article… but what can I say… I procrastinate a whole
lot and never manage to get anything done.